 |
||||||||||||||||
 |
||||||||||||||||
|
Polyisocyanurate Mechanical Insulation
Our ISO-25 and ISO-C1 polyisocyanurate insulation (rigid foam) are produced as large polyiso bunstock and can therefore be fabricated into virtually any shape or size to fit mechanical components. "Mechanical insulation" encompasses insulation utilized for piping and equipment, as defined by the Construction Specification Institute in their MasterFormat document. The new MasterFormat 2004 classification system provides a more detailed breakdown of mechanical insulation categories than the superceded 1995 version (see right sidebar).
ISO-25 and ISO-C1 polyisocyanurate insulation are is ideally suited for the commercial and industrial applications identified in bold. ISO-25 is particularly suitable as a higher efficiency replacement to cellular glass or fiberglass on chill water applications.
- 23 07 00 HVAC and Chilled Water Insulation
- 23 07 13 Duct Insulation
- 23 07 16 HVAC and Chill Water Equipment Insulation
- 23 07 19 HVAC and Chill Water Piping Insulation
- 40 42 00 Process Piping and Equipment Insulation
- 40 42 13 Process Piping Insulation
- 40 42 13.13 Cryogenic Temperature Process Piping Insulation
- 40 42 13.16 Low Temperature Process Piping Insulation
- 40 42 13.19 Intermediate Temperature Process and Chill Water Piping Insulation
- 40 42 13.23 High Temperature Process Piping Insulation
- 40 42 13.26 Process Piping Insulation for Specialty Applications
- 40 42 23 Process Equipment Insulation
- 40 42 23.13 Cryogenic Temperature Process Equipment Insulation
- 40 42 23.16 Low Temperature Process Equipment Insulation
- 40 42 23.19 Intermediate Temperature Process and Chill Water Equipment Insulation
- 40 42 23.23 High Temperature Process Equipment Insulation
- 40 42 23.26 Process Equipment Insulation for Specialty Applications
- 40 42 13 Process Piping Insulation
Old MasterFormat 1995 (superceded)Section 15080: Mechanical Insulation:
|