(800) 433-5551
(305) 921-0100
info@dyplast.com

Pipe and Mechanical

Mechanical Insulation, Pipe Insulation, and Equipment Insulation: Polyisocyanurate

Our ISO-C1®  (Class 1) and ISO-HT®   (higher temperature) polyiso rigid foam equipment insulation is produced as large bunstock and can therefore be fabricated into virtually any shape or size to fit pipe or other mechanical components. "Mechanical insulation" is essentially the Construction Specification Institute terminology for equipment insulation and encompasses insulation utilized for piping insulation, fitting and valve insulation, and equipment insulation such as tank insulation. The newer CSI MasterFormat 2004 classification system provides a more detailed breakdown of mechanical insulation categories than the superseded 1995 version (see sidebar below).

Both ISO-C1 (-297F to +300F) and ISO-HT (-297F to 375F) polyisocyanurate pipe insulation is ideally suited for the commercial and industrial insulation applications. ISO-C1 polyiso is particularly suitable as a higher efficiency / lower life-cycle cost replacement to expensive cellular glass or ineffective fiberglass on chilled water pipe insulation applications.
Dyplast's Specifications are designed around the CSI format that allows engineer/specifiers to conveniently incorporate quality insulation specs into the overall industrial design.

  • 23 07 00 HVAC and Chilled Water Pipe Insulation
    • 23 07 13 Duct Insulation
    • 23 07 16 HVAC and chilled water Equipment Insulation
    • 23 07 19 HVAC and chilled water Piping Insulation
  • 40 42 00 Process Piping and Equipment Insulation
    • 40 42 13 Process Piping Insulation
      • 40 42 13.13 Cryogenic Temperature Process Piping Insulation
      • 40 42 13.16 Low Temperature Process Piping Insulation
      • 40 42 13.19 Intermediate Temperature Process and chilled water Piping Insulation
      • 40 42 13.23 High Temperature Process Piping Insulation
      • 40 42 13.26 Process Piping Insulation for Specialty Applications
    • 40 42 23 Process Equipment Insulation
      • 40 42 23.13 Cryogenic Temperature Process Equipment Insulation
      • 40 42 23.16 Low Temperature Process Equipment Insulation
      • 40 42 23.19 Intermediate Temperature Process and chilled water Equipment Insulation
      • 40 42 23.23 High Temperature Process Equipment Insulation
      • 40 42 23.26 Process Equipment Insulation for Specialty Applications

LNG-tank-insulation.jpg

Old Master Format 1995 (superseded)

Section 15080: Mechanical Insulation:
  • 15082 Piping Insulation
  • 15083 HVAC Piping Insulation
  • 15084 Equipment Insulation
  • 15085 HVAC Equipment Insulation
  • 15086 Duct Insulation