•	Specification
•	Physical Properties
•	Data Sheet (PDF)
•	MSDS
•	Approvals and Compliance
•	Recommended Thicknesses
•	Installation
•	Size and Dimension

ISO-C1 Cryogenic Insulation

Cryogenic liquids often pose particularly complex handling, storage, and transporting problems. Dyplast Products' ISO-C1, our rigid foam polyisocyanurate insulation, is the optimum solution for temperatures down to -300F. For temperatures below -300F, consult with our technical staff.

Our ISO-C1 production line uses hydrocarbon blowing agents, producing polyiso bunstock with superior physical characteristics, high R-factor, and zero ozone depletion potential (zero-ODP), making it a cost-effective and environmentally friendly choice. With the highest R-value to thickness ratio of any commercially available insulation, no other insulation compares. ISO-C1 is highly moisture resistant, strong, durable, and lightweight. It handles, works, and installs easily. ISO-C1‘s low friability means it creates minimal dust.

ISO-C1 is available in varied densities (2, 2.5, 3, and 4 lb/ft³) and variable sizing which can result in reduced waste when cutting to particular dimensions - - thus resulting in cost savings.

For low-temperature applications ISO-C1 polyiso insulation is a superior choice over alternative products such as cellular glass, polyurethane insulation, perlite, or fiberglass.

Cavity Wall Insulation - Roof Insulation - Cryogenic Insulation - Civil Insulation - Architectural Forms - Mechanical Insulation - Sustainable Construction - Refrigeration - Transportation Insulation - Process Piping Insulation - LNG Insulation - Chilled Water System Insulation

ISO-C1 Cryogenic Insulation

Temperatures of Liquid Gases